Angelot Flooring Ltd
HomeOur ServicesHow to choose your floorFAQs & Customer CommentsContact UsDESIGN & HERRINGBONESOLID HARDWOODENGINEEREDLAMINATEAccessories & Floor Care
Customers Comments

LEAVE COMMENT  VIEW COMMENT

You can leave or view your comments here on the links above.

All the Comments are Genuine, and we kindly ask our customers to write their email address or the job address to confirm the person making the comment

                                 

 Frequently Asked Questions


To book a visit, how long do I need to wait?

>Usualy we come to visit you withing 24 hours

What is the waiting time on supply?
>Most of our flooring we have in stock which can be delivered withing 2-3 days
How long takes to install one room 3 by 3 sq metre
>If there is not furniture around 20 sq metre can install one person a day

What are the different types of floor: Solid, Engineered, Herringbone & Laminate Floors
  • Solid - floors which have the specific wood for the whole thickness of the floor. These are normally fixed to the sub-floor.
  • Engineered - floating hardwood floors made up of 3 layers: a hardwood veneer top layer a core layer and a stabilising base layer. 
    Both Solid and Engineered  are unfinished or pre-finished with either a lacquer or an oil. Also we have aged oak, smoked in brown or white
  • Herringbone is a design flooor, usually comes in small boards and its layed in V Shape form. Herringbone has to be sticked down in a even surface.
  • Laminate its the budged floor, its made with small procentige of wood, thin and you can also find water proof Laminate

    >Can I have an Engineered floor on top of floorboards?Yes, using a suitable underlay. If laying in the same direction as the floorboards then lay hardboard first.

    Can I have an Engineered floor on top of concrete?

    Yes, using a suitable underlay and a surface vapour barrier on top of the concrete. This is not to be confused with the damp proof membrane in the concrete. You must have both.

    Can I have a Solid floor on top of concrete?

    Yes this can be done, but it very much depends on the product. Herringbone blocks for instance could be glued down onto concrete, but you should think twice about using solid plank floors on concrete. Get expert advice, and make sure the 'expert' uses a hygrometer.

    Can I have a Solid floor on top of floorboards?

    Yes, solid floors can be nailed directly to existing floorboards. If laying in the same direction as the floorboards then lay 6mm ply first.

    What do I do if my concrete floor is not level?

    You can level your concrete floor using self a levelling compound.

    How can I check that my floor is level?

    Using a long straight edge. Minor fluctuations in your sub floor are all right. Most floors can tolerate +/- 3mm over a 2 metre span. If in any doubt contact a professional floor fitter. To successfully lay a hardwood floor the subfloor should be one level; this may mean raising the level in one room to match the next. This can be done with different thickness of ply or hardboard depending on the height difference.

    I would like the floor to run through to hallway, but I do not want any breaks?

    As professionals we would recommend a break, but we understand that people do not like breaks. Fit the floor without a break but be prepared - you may need to put the break in at a later date.

    Can I have a wood floor in the kitchen and which one?

    Yes a wooden floor in a kitchen is just fine! You can use both solid and engineered.

    Can I have a wood floor in the bathroom and, if so, which one?

    We do not recommend hardwood flooring of any type in a bathroom.

    Can I have wood floor on top of existing tiles, lino, carpet or wood floor?

    Yes you can as long as you choose a floating and engineered floor.

    I would like to have a new floor in the kitchen but I am also changing a kitchen which one should I do first?

    Fit the kitchen first, or make sure you kitchen fitters are very very careful of your new floor!

    Can I have a wood floor in the conservatory?

    Yes, engineered floors are best suited to conservatories because of their stability.

    Can I have a wood floor on top of underfloor heating?

    Yes and because of their stability, engineered floors are the most suitable.

    Is wood floor cold?

    No, wood is a great insulator. A wooden floor will feel warm in winter and cool in summer.

    How do I keep my floor clean?

    New hardwood floors need very little looking after. Regular sweeping and / or vacuuming will keep the floor free of surface dirt. Good mats inside and outside all entrances will keep shoes free of grit and dirt. It is a combination of surface dirt and dirt on shoes that damages the lacquer on your new floor. A floor can be mopped using a mild floor soap with a well rung out mop as required.

    How often will I need to restore my floor?

    This will depend on how well you look after your floor. In a normal domestic situation we anticipate that the floor will require refinishing every 10 to 15 years

    I am worried that my dog will scratch the floor?

    Dogs claws will scratch the lacquer on your floor. Either knit him some socks or consider an oiled floor!

    Can I have wood floor in the flat? I am worried about my neighbours!

    Yes you can have wooden floors in your flat, but remember to use an approved acoustic underlay.

    Can I have my stairs done in wood floor?

    Yes you can. We have matching wooden nosings (stair edges) for all of our floors.

    Do wood floors change colour?

    Yes they do, it's all part of owning a beautiful and natural hardwood floor.

    If I have a problem with central heating pipes, what can I do?

    If you have a clic/loc floor, simply lift it up, repair the pipes and put it down again

    Will my furniture dent/scratch the floor?

    All wood floors dent and scratch. However, to minimise this use felt pads and casters on the bottom of your furniture, especialy chairs.

    Can I have a load bearing floor/can I fix it to joists?

    For a floor to be load-bearing, it needs to be at least 18mm thick. Solid hardwood floors are 18/20mm thick, and need to be nailed every 250mm. The joists in most houses are 400mm apart. Also Engineered 20mm thick can be layed in the josts

    Do I need to cut down my doors?

    Yes, if the new floor is higher than your existing floor.

    How long will my floor last?

    With the right care and attention, a quality hardwood floor will last for hundreds of years.

    Do I need to acclimatise my floor before it is fitted?

    Yes and No. Engineered floors need no acclimatisation and in fact once a pack is opened the floor must be fitted. A solid floor will need a minimum of 4-5 days to climatise in winter where the wheather its cold

    If your answer its not here please use the Contact Us form and we will be glad to answer  you.